Indiana Metal Inc. · Everything to finish the job
Metal Roofing &
Siding Accessories
Fasteners, insulation, condensation control, sealants, pipe boots, ridge vent — everything you need to complete a metal roofing or siding installation, stocked and ready at Indiana Metal. One supplier. No chasing parts from three different vendors.
Everything to Complete the Job
Panels and trim are the structure — accessories are what make the system perform for decades. The right fastener, the right sealant, the right condensation control. We stock them all.
Fasteners
Color-matched metal roofing screws, ZMAX high-corrosion fasteners, rivets, and specialty clip fasteners. Lakeside brand, stocked in standard colors.
Shop Fasteners ↓Drip Stop
Pre-applied condensation control for metal panels. Eliminates drip in non-climate-controlled buildings — no separate underlayment required.
Learn More ↓rFoil Insulation
Reflective bubble insulation that blocks 96% of radiant heat. Doubles as a vapor barrier. Fire-rated and eligible for federal energy tax credits.
Learn More ↓Sealants & Butyl Tape
Geocel 2300, MasterSeal NP125, and SC2 butyl tape for laps, seams, and penetrations. The right product for every joint on the job.
See Options ↓Pipe Boots & Flashings
ProGuard Seal and Deks Original pipe boots for weathertight penetrations through metal roofing panels. Multiple size options available.
See Options ↓Ridge Vent
SC110 vented closure for metal roofing ridge caps. Provides continuous airflow while blocking insects, debris, and weather infiltration.
Learn More ↓Fasteners for Metal Roofing & Siding
Color-matched, corrosion-resistant, and engineered for metal panel applications. We stock Lakeside fasteners in all standard Indiana Metal colors.
WoodX Metal-to-Wood Fasteners
In Stock · All ColorsThe standard fastener for attaching metal roofing and siding panels to wood substrates — purlins, decking, and framing. Self-tapping with a Type-17 cut point for fast starts and clean penetration without pre-drilling in most applications.
Stocked in lengths from 1" to 2½" and available in all Indiana Metal standard colors, so your fastener heads disappear into the panel — not stand out against it.
Color-matched EPDM washers provide a watertight seal at every fastener location.
- Self-tapping Type-17 cut point — no pre-drilling required
- Lengths from 1" to 2½" in stock
- Available in all standard Indiana Metal panel colors
- Color-matched EPDM bonded washer — weathertight seal
- Weather-resistant coating — rust and corrosion resistant
- Lakeside brand — engineered for metal panel applications
ZMAX™ High-Corrosion Fasteners
Quick TurnaroundWhen the job is in a coastal, high-humidity, or heavy snow-load environment, standard fasteners aren't enough. ZMAX fasteners use a forged corrosion-resistant alloy head engineered to resist red rust — even in the toughest conditions.
The EPDM concealed washer provides a consistent weathertight seal, and H-Low™ deep threads deliver maximum holding power in both wood and panel-to-panel applications.
Stocked in 1" to 2½" in standard colors. A reliable upgrade for any project where long-term fastener integrity matters.
- Forged ZMAX alloy head — resists red rust long-term
- EPDM concealed washer — weathertight, consistent seal
- H-Low™ deep threads — maximum holding strength
- Type-17 cut point — fast starts, clean penetration
- 1" to 2½" lengths in standard colors
- Ideal for coastal, high-humidity, and high snow-load regions
Additional Fastener Options
Contact us to confirm current availability on sizes and colors.
300 Series Rivets
Blind rivets for metal-to-metal applications, trim connections, and flashing details where screw access is limited.
↓ Spec SheetProClipLok
Concealed clip fastening system for standing seam and mechanically seamed panel applications.
↓ Spec SheetPro-Tek
Metal-to-metal fasteners for structural connections, panel laps, and applications requiring extra corrosion resistance.
↓ Spec SheetDrip Stop Condensation Control
The fastest way to solve condensation in non-climate-controlled metal buildings — pre-applied to your panels before they leave our facility.
Dripstop™ Pre-Applied Membrane
Available on Panel OrdersCondensation is one of the most common complaints in metal buildings — especially barns, equipment storage, and agricultural structures that aren't climate-controlled. Dripstop™ solves it at the panel level.
The membrane is pre-applied to the underside of the metal panel before it ships. It absorbs condensation as it forms, then releases it slowly as a vapor — eliminating the drip entirely without requiring a separate insulation layer underneath.
Over 550 million square feet installed annually worldwide. Works in wind and challenging installation conditions. No additional labor for separate underlayment installation.
- Pre-applied at the factory — no field installation required
- Absorbs condensation, releases as vapor — eliminates drip
- Cuts installation time — no separate underlayment needed
- Maintains visibility of work surface for job site safety
- Works in windy and challenging installation conditions
- 550M+ sq ft installed annually worldwide
- Ideal for barns, storage, agricultural, and post-frame buildings
rFoil Reflective Insulation
Lightweight reflective insulation engineered for metal and post-frame buildings. Blocks radiant heat, controls condensation, and qualifies for federal energy tax credits.
rFoil 2510 Series — Metal & Post-Frame Insulation
In Stock · Tax Credit EligibleThe 2510 Series is a single-bubble reflective insulation designed specifically for metal roofs, metal walls, and post-frame buildings. The structure — polyethylene bubbles sandwiched between a reflective radiant barrier and a white UV-resistant finish — reflects radiant heat rather than absorbing it, keeping buildings cooler in summer and warmer in winter.
It also functions as a vapor barrier, controlling condensation in metal buildings where temperature differentials cause moisture buildup. Tear-resistant, non-toxic, mold and mildew resistant, and fire-rated Class 1 / Class A (ASTM E84).
This product qualifies for energy tax credits under the Inflation Reduction Act — a real selling point for homeowners and building owners managing project costs.
- Reflects 96% of radiant heat — reduces heating and cooling costs
- Functions as a vapor barrier — controls condensation
- Fire-rated Class 1 / Class A (ASTM E84-09)
- Tear-resistant, non-toxic, mold & mildew resistant
- Lightweight — easy to install, low labor cost
- Manufacturer warranty included
- Qualifies for Inflation Reduction Act energy tax credits
- Ideal for metal roofs, walls, post-frame, and retrofit projects
Sealants, Pipe Boots & Ridge Vent
The finishing details that make the difference between a watertight system and a callback. Contact us to confirm current stock on specific products.
Sealants & Butyl Tape
Geocel 2300 Construction Sealant
Tripolymer sealant for metal roofing laps, trim, and penetrations. Excellent adhesion to Galvalume and painted steel. Paintable and UV-stable.
↑ Product InfoMasterSeal NP 125
One-component polyurethane sealant for expansion joints, panel perimeters, and metal-to-masonry transitions. Flexible and weather-resistant.
↓ Spec SheetSC2 Butyl Tape
Self-adhesive butyl seam tape for panel laps, ridge applications, and trim sealing. Stays flexible in cold weather — critical for Indiana winters.
↓ Spec SheetPipe Boots & Penetration Flashings
ProGuard Seal Pipe Boot
Flexible EPDM pipe boot for metal roofing penetrations. Fits standard pipe sizes, installs fast, and provides a long-lasting weathertight seal around pipe and conduit penetrations.
↓ Spec SheetDeks Original Pipe Boot
EPDM rubber flashing boot with a wide base for secure attachment to metal panels. Highly flexible, UV-stable, and designed for long-term performance on metal roofs.
↓ Spec SheetRidge Vent
SC110 Vented Ridge Closure
Foam closure strip with built-in ventilation channel for metal roofing ridge caps. Provides continuous airflow along the ridge while blocking insects, debris, and wind-driven weather from entering at the panel corrugation.
↓ Spec SheetNeed Accessories for Your Project?
Call either location, email our sales team, or get a quote online. We'll make sure you have everything you need to finish the job right.